§ 16-6-10. Agriculture and residential density and dimensional standards.  


Latest version.
  • The following specifications shall be required in the zones identified:

    Zones A Agriculture R-1 Residential Single-family Rural Density R-2 Residential Single-family Medium Density R-3 Residential Single-family senior housing R-4 Residential Multi-family MH Mobile/Manufactured Home Park
    Standards
    Minimum site area 5 acres 1 acre 6,500 sq. ft. 1 acre 11,500 sq. ft. 10 acres
    (80 acres maximum)
    Minimum lot area per dwelling (sq. ft. unless otherwise noted) 5 acre 0.5 acre 6,500 4,000 11,500 (plus 2,000 per each unit over two) 4,000
    Maximum net density (units per acre) 0.2 1 4 7 12 7
    Minimum lot width (at setback line) (feet per dwelling) 120 120 60 50 25
    (Townhomes)
    50
    Minimum front yard setback (feet)
    Principal building 50 50 20 15 15 Front - 10
    Entry side - 15
    Attached garage 25 25
    Accessory building/detached garage 60 60 35 35 35 25
    Minimum side yard setback 20 20 7
    15 on nonentry side of corner lot
    7 7 (at end of each row) 10 Opposite entry
    Minimum distance between buildings 20 20 10 10 10 10
    Minimum rear yard setback (feet)
    Principal building 20 20 20 10 15 10
    Accessory building or structures 5 5 5 5 5 5
    Deck 10 10 10 10 10 10
    Patio cover 10 10 10 10 10 10
    Minimum floor area (above grade) per dwelling unit 864 864 864 864 600 480
    Maximum building height (feet) 35 35 35 One-story
    25 feet
    35 16
    35 Park-owned common structures
    Maximum dwelling units per structure 1 1 1 1 12 1

     

    For Subdivisions of over 10 single-family lots, the average lot size shall be a minimum of 7,500 sq. ft.

    (Ord. 11-2007 §1)

(Ord. No. 7-2010 , § 2, 7-27-10)